Centroid Community CNC Support Forum

Yep I just discovered that also... re-initializing the ATC has resolved the issue.

Thanks Gary

Yes, the Height offset would typically be called in the G code job file.

The issue I'm experiencing is to do with the CNC "thinking" that T1 is in the spindle regardless of which tool it has just picked up.
Even though CNC12 shows the correct T# at the top of the screen.

When I first initialised ...

I have a custom M6 macro that for the most part works, well sort of.
With T1 in the spindle, a T2 request results in a perfectly executed unloading of T1 and loading of T2 into the spindle.
Once the macro is complete, CNC 12 displays T2 H1 at the top of the screen.

Now with T2 in the spindle, a T1 ...

Thanks for the feedback cncsnw and Tom.

After two additional days of testing without any issues, I'm comfortable with calling it a freak event.
If no one else has experienced this issue, then perhaps it was either PC related or just a bad combination of anomalies within CNC12.

If it presents ...

Update

Attempting to graph a job (F8) also triggered the "wxWidgets Debug Alert", so the problem is not exclusive to VCP buttons calling macros.
It's possible the job file was no longer at the same folder location, and this may have been the trigger.
After a restart of CNC12 and choosing a new job ...

This issue relates to a new Oak install with a custom PLC.
Every time a VCP button calls a custom .mac or custom .cnc file, a "wxWidgets Debug Alert" pops up onscreen.
The only way to recover from this is to restart CNC12(V5.08).

Calling the same macros from the MDI screen presents no issues, and ...

Excellent!
Worked a treat.

Thanks for taking the time to share.

OK, thanks.

I was able to find a way to allow an M-code and a VCP button control the same output....
​IF M38_SV || Aux1LED_O THEN (OUT4)
IF SkinAux1_M_SV THEN (Aux1PD_PD)
IF (Aux1PD_PD ^ Aux1LED_O) THEN (Aux1LED_O)

Unfortunately this results in the M-code and VCP button working independently of ...

How was the issue solved?

Thanks Tom

The Hickory board sounds exciting, and will definitely be on my radar for future builds.

Troy