Hi Keith here are some more Pics of the Machine. Yes you may use them on the web page. I do not know why all these came out side ways. Can you rotate?
Thanks John
Search found 86 matches
- Wed Feb 08, 2023 11:20 am
- Forum: Success Stories
- Topic: Bridgeport Interact 412
- Replies: 9
- Views: 10755
- Sun Feb 05, 2023 11:47 am
- Forum: Success Stories
- Topic: Bridgeport Interact 412
- Replies: 9
- Views: 10755
Re: Bridgeport Interact 412
Yes I am using the on off buttons for manual spindle control. The way I have it set up it is coming from the 0-10 volt terminals on the acorn board to the 0-10 volt terminals on the VFD.
- Sat Feb 04, 2023 10:42 pm
- Forum: Success Stories
- Topic: Bridgeport Interact 412
- Replies: 9
- Views: 10755
Re: Bridgeport Interact 412
Ok here is the info on the build. The spindle motor is the original 5.5 KW Fanuc. The spindle is ran with 220 single phase with a Delta C2000 VFD with a PG01L Encoder Feedback Card for the spindle orientation. The Servos and Drives are Bergerda Automation Technology. The Z axis is a 1.5 KW and the X...
- Sat Feb 04, 2023 12:13 am
- Forum: Success Stories
- Topic: Bridgeport Interact 412
- Replies: 9
- Views: 10755
Bridgeport Interact 412
Just want to put this pic out there
- Sat Dec 31, 2022 8:31 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Orient Spindle
- Replies: 2
- Views: 430
Re: Orient Spindle
Ok If I force out 2 with out 4 then it orients the spindle. What provision do I need to put in place to make it work with out forcing out 4. When I do the M 19 it does not turn on out 2. What might be causing that.
Thanks John
Thanks John
- Sat Dec 31, 2022 6:05 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Orient Spindle
- Replies: 2
- Views: 430
Orient Spindle
Hi Guys I need some help. I'm trying to get my spindle to orient. When I put M19 into MDI. I get 311 Waiting for memory #13 (M101) I have been wiring and setting parameters off of Tech Bulletin TB 316. What is the actual order of events for the spindle to orient? when I use M19 it doesn't fire the r...
- Wed Nov 02, 2022 10:52 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Delta C2000 pgf3
- Replies: 0
- Views: 1185
Delta C2000 pgf3
Hi All has anybody ever get a PGF3 error when setting up there PG01L card for spindle orientation? I do want to say that I did have an issue with the pass through wiring to show RPMs on Acorn. So I piggy backed the wires to get the RPMS to show up. I did find a error code sheet that I will include w...
- Sun Oct 23, 2022 11:59 am
- Forum: Centroid Acorn CNC Controller
- Topic: Delta C 2000 set up
- Replies: 11
- Views: 1423
Re: Delta C 2000 set up
Hello cncsnw could you be so kind to sketch a wiring diagram for wiring up the PG01l to acorn?
Thanks John
Thanks John
- Sun Oct 16, 2022 9:50 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Delta C 2000 set up
- Replies: 11
- Views: 1423
Re: Delta C 2000 set up
Ok I’ll have to give it a try.
Thanks for looking at this you answered some questions
The acorn board only has 1 db9 port. How does the encoder get wired to the db9 for acorn and also to the Emc-PG01L board?
Thanks for looking at this you answered some questions
The acorn board only has 1 db9 port. How does the encoder get wired to the db9 for acorn and also to the Emc-PG01L board?
- Sun Oct 16, 2022 9:01 pm
- Forum: Centroid Acorn CNC Controller
- Topic: Delta C 2000 set up
- Replies: 11
- Views: 1423
Re: Delta C 2000 set up
Would that be enough to get rpm’s. Could that be wired to a db9 and plugged into Acorn and get Rpm’s . just wondering . I am working on putting a encoder on it.