Centroid Community CNC Support Forum

Worked that time! Thanks!

thanks! the only thing i changed from your file is the location of the rear park function. (ive been trying to figure out how to do that, so thank you. )

Vetric is giving me this fault

im using the centroid post processor in v carve 12 pro

vetric vcarve. here is a gcode file i just ran.


for the cap and resistor, just wire them to the avout going to the vfd?

Maybe attach a toolpath that is diving into the bed and we can see what it is doing. Cutting Z zero and Machine Z zero are two different things.


it is every toolpath.

So, When i press cycle start, the machine goes to xz zero and z home. (all the way up) and asks to insert tool and press cycle ...

Do you have a capacitor across the 0-10v output to stabilize it?


I do not. I did not see that in the manual. i did see the snubber caps on the contactors, but not on the analog output. What size do you recommend?

Also, I know this is something simple, but im stuck again.

I've been running ...

alright, i guess ive lost you guys. last thing, the voltage going to the vfd dips during operations. at a seemingly random interval. When i measure the voltage at the acorn board the voltage smooths out. any ideas?

videos in the drive folder

You're telling me buddy!

So here is todays issue, I PROMISE I have looked through both manuals, I'm missing something.

I have the machine dialed in o within .001 on the Z, and less than .001 for the x and y. I got my rapids and homing set up again, NOW

My tool sensor is not working to measure ...

I don't know how to read, do to a lack of proper education.

thanks!