Centroid Community CNC Support Forum

Could we add a filter for all tools that are not empty? I would like to start numbering my twist drills at 100,101, 102..., Bull nose at 50, 51, ... Flat endmill at 10,11,.... but if I do this, I can't see them in CHIPS because they are too far down.

Is this a good place to put in feature requests ...

Hello,
Is there anyway to control both the feed rate and the rapid rate from the WMPG-6 knob selector? The first rapid moves are often just as scary with new setups. I'd like to have the feed and rapid % be equal so I can ease into position the first time I run a part, from the comfort of my own ...

Hello,
I am trying to set the axis to half the current position from the WMPG6 to find center with an (non-connected) indicator: jog to the left of the part, press "=0" on the mpg, then probe to the right and press "Macro1".
The "set axis=0" button on the default skin and associated macro ("C:\cncm ...

Due to the warp in my table, I really could use bi-directional compensation rather than a simple sum of the offset taken at a single value.
I dial in z when crossing the table at, say, the midpoint of the table and it works great, but then I need a whole other set of compensation values at different ...

Say I want to change something in the wizard. I go to utility menu, maybe create a report, then remember I should park before turning off the machine, and press escape and go back. But usually after pressing park, then remembering to escape and the park.

Or: when setting up scales, you have to ...

Anytime I want to Park and Home, I forget to press escape a bunch of times to get back to the main screen. Is there anyway we can allow park and home from any screen?

After doing some surgery on my CNC and upgrading the motors to clearpath (finally), I am back to the point of setting up Vol. comp.
Something seems off to me. Say all my tables are empty except for 4 th column of cnc-y.tab ( X compensation). I am compensating the X axis when jogging in the y ...

Hello,
I'd like to be able to double click a DRO field on the main screen and type in what it should be. This would be an ideal workflow to, say, jog the z until a dowel pin can fit between the workpiece and the tool, and simply type in the dowel diameter into z.

If the DRO field is strictly read ...

Hello,
I would like to develop some CNC12 macros and skins away from home. It seems some posts allude to being able to use a CNC12 emulator, but I have not been able to recreate this. I think they are implying it is for "intercon" only.
http://centroidcncforum.com/viewtopic.php?p=99352&hilit ...

Item #2 sounds like a good rabbit hole, thank you