Centroid Community CNC Support Forum

Great. I will resolve an issue first: One PM and yourself indicated today and intent to purchase. You came first by time, you will get it, if that falls thru, the other guy will get it. Send paypal to ea425019 at gmail dot com I break up the email just to control spam bots, but anyhow, I look forwar...

Price adjusted in original post, now $650.

Individuals wishing to buy just the pendant, can have it for $210 now, plus actual shipping charge.

Price adjusted, see above, $800

Hi,

Give me until Friday, see if the whole set sells, then if it has not, I would sell just the pendant to you.

Eric

SOLD Selling my Acorn6 control system. I am selling the combination for 60% of new value, which equates to $1099 + $299 + $59 +$229 {Controller, Pendant, CNC4PC to Clearpath board, and Router Pro CNC12 software) = $1686 Now selling for $650 Everything works. It was not optimal for my machine needs,...

So I have the Y screw comp set with a "false backlash" of 2mm, i.e. set one column to 50.0 the other to 52. The screw comp affects left = primary, it does not affect the paired one. Also, must we restart when changing screw comp tables or Y/N flag for screw comp? Is the protocol to select ...

Ok,
So I will reverse one within the Clearpath control side, then set Centroid side to both same way.
This is easy enough. I'll give it a try.
Thanks

Upon further investigation, screw comp on Y is only affecting one of the channels even if both are selected, for Y. I set screw comp to a figure of 11mm instead of 25, it travels the 'extra corrected' distance on the Y-sl only. Earlier in the evening it was travelling in the Y non-sl only, anyhow. H...

Hi, My screw compensation procedure for X worked well. For Y on a slaved gantry machine, it does the opposite, doubles the error. I then flipped polarity of all compensations, how come it provides an opposite correction? Is the screw comp Y/N selector supposed to be enabled for both Y and Ysl, or ju...

You are correct.

I fancy a way to call some math function into the gcode, identifying final position, then rounding it, without overstepping and inducing backlash, i.e. always staying in the lead direction. But I'm not certain it can be done. It's OK. Thanks