Centroid Community CNC Support Forum

hi, yesterday an similar issue, but this time more critical, because it was not visible before in the graph. i made a very simple inner profile with 17,5mm inner diameter, file looks good in the graph. the tooling itself was good, tool was at 17.5, but the way back it goes at 17.8 in diameter and i ...

hi Uwe,

good to know, that you have the same bug. i wasn´t aware of the relation with cutting depth, but this could be the reason, why i dont have this issue all the time

hi all, today i had the same issue again. I made a program for testing internal threading ( is attached ). when seeing the graph the first time i didn´t notice any issue so i started. but when meassuring the thread i figured out, that the core-hole was too big, around 0.5mm. should be 21mm, but it w...

hi all, i udated to the new 5.19rev3 Beta. Installation was okay, but after setting the wizzard i got an error-message: PLC Error.png most of the settings i did are not working. i opened a wizzard and tried again, without succes. Machine is not useable right now. any ideas, if maybe i did something...

hi all, i udated to the new 5.19rev3 Beta. Installation was okay, but after setting the wizzard i got an error-message: PLC Error.png most of the settings i did are not working. i opened a wizzard and tried again, without succes. Machine is not useable right now. any ideas, if maybe i did something ...

Hi Uwe,

Thanks, didnt know that this is allready available. Thank you so much.

Best regards
Michael

Hi Guys, when working with my lathe, i was wondering, if there is a shorter way to set Part Z Zero. in normal case, after finishing a part, i have to move the Z Axis to the new end of stock material and press part setup, choose the right tool and then reset Z Zero. is there a possibility to have the...

I use them also and they are working fine until now, but the Z Pulse is not working! No idea why, but there is no Signal what i can use for Homing.

Michael

Hi Uwe, yes thats right, i Made the Screenshots just for showing the issue above, so these are the standardvalues when opening the oneshot.

hi Uwe, thanks, i know that. but its a modification and why it cannot be integrated in the stock version ?